Ford Duratec 2.0L/2.5L 45mm Electronic Fuel Injection (EFI) With Drive By Wire (DBW) (Electronic Throttle Actuator (ETA)) Throttle Bodies (ITB's)


These Direct-To-Head (DTH) set of Twin Housing Throttle Bodies (ITB's) which are port matched to suit the Original Equipment Manufacturer (OEM) intake ports for the Ford Duratec 2.0L & 2.5L Engines, typically found in the Ford Focus, Mondeo & Mazda L series.

This package includes Direct-To-Head Throttle Bodies (ITB's) and AT Power's Drive-By-Wire (DBW) (Electronic Throttle Actuator (ETA)) pre-mounted onto a replacement (Duratec) PCV baffle plate for ease of installation.

AT Powers Drive-By-Wire Actuator (DBW) provides maximum torque and operational speeds for fast and responsive electronic actuation whilst also offering the user the additional advantages of electronic actuation when supported by a suitable engine management system.

  • Auto-blip for paddle shift.
  • Launch control.
  • Anti-lag.
  • Switchable pedal map.
  • Controllable push to pass strategy.
  • Pit lane speed control.
  • Traction control.
  • Variable bank to bank control.
  • Warm up (Idle Air Control (IAC))

AT Power’s lightweight precision machined billet aluminium twin oval housings design, with our unique patented ‘Shaftless’ technology and knife edged butterfly valves (Blades) providing proven improved induction airflow speeds and increased engine performance.

AT Power has developed a unique range of Direct-To-Head (Electronic Fuel Injection (EFI)) Twin Throttle Body systems, offering you multiple configurations and a range of optional extras to meet your specific engine tuning requirements.

Our Direct-To-Head Twin Throttle Bodies are supplied fully assembled ready to bolt on directly to the cylinder head intake face. (Note: This Product is supplied with cylinder head injector plugs to blank-off (OEM) injector pockets).

We offer a choice of product options including billet machined Throttle linkage configurations including Drive-By-Wire (DBW), Throttle positional sensors (TPS) mounting kits, SLS 3D printed Extension Tubes (Runners, Velocity Stacks) lengths (Note: Colour Black), billet aluminium Ram Pipes (Trumpets) lengths and one-piece billet aluminium Fuel Rails with brackets to suit a range of fuel injectors.

This product is available for Duratec 2.0L & 2.5L with configurations of Inlet port sizes. Please refer to the Product package drawings before making your selection from the available option sets below.

We also offer optional extras including fuel rail fittings, vacuum take off fittings for vacuum assisted brakes, rotary contact or Hall Effect contactless Throttle Positional Sensors (TPS), Drive-By-Wire (DBW) actuation and a choice of 18 different anodising colours. Anodising-Colour-Swatch

To complete your installation, we also offer ancillary supporting parts including fuel injectors, air filtration, motorsport cables, tuning aids, fuel pressure regulator and engine management systems (ECU’S).

Attention! Images shown are of our bespoke Swan Neck SLS 3D printed Extension Tubes (Runners, Velocity Stacks) specifically designed for packaging of this product within the standard Mazda MX-5 NC engine bay.

For these Ford Duratec DBW applications straight SLS 3D printed Extension Tubes (Runners, Velocity Stacks) will be supplied as standard.



This product requires an after-market engine management system (ECU) for correct engine fuelling operation.

AT Power offer a choice of after-market (ECU's) which can be viewed on the ECU's & Wiring Looms page of our website, or by following this link ECU's & Wiring Looms

As with all after-market engine management systems, base maps are offered “as-is” and dyno tuning is fully recommended, to avoid causing any damage to your engine.



Product Informational Downloads:

PDF Package Drawing Download - Ford Duratec 2.0L 45mm (OEM) Intake Ports

PDF Package Drawing Download - Ford Duratec 2.5L 45mm (OEM) Intake Ports

PDF Package Drawing Download - Ford Duratec 2.5L 45mm With 2.0L Intake Ports

Electronic Throttle Actuation Technical Specifications 


How to Order:

In-order to verify your specific requirements, and provide the correct solution for your application please select your configuration from the option sets below: 

If you require assistance, please feel free to call us and speak with a member of our sales team.


Trade Customers:

Please contact us to enquire about our trader's discount structure.


Price starting from: £2,152.00 per unit ex VAT

Brand AT Power
Product Code 102-104-00103 (2.0L With OEM Intake Ports) OR 102-104-00113 (2.5L With OEM Intake Ports) OR 102-104-00112 (2.5L With 2.0L Intake Ports)

Price: £2,152.00 per unit ex VAT

Related Products